TOA VM2240 240W ZONE PAGING AMPLIFIER front panel with controls
TOA VM2240 rear panel complete
TOA VM2240 rear panel left side inputs and outputs
TOA VM2240 rear panel right side inputs and outputs
TOA VM2240 240W ZONE PAGING AMPLIFIER front panel with controls
TOA VM2240 rear panel complete
TOA VM2240 rear panel left side inputs and outputs
TOA VM2240 rear panel right side inputs and outputs
Sale!

TOA VM2240

TOA VM2240 5 zone (each with vol control) Mixer Amplifier with 3 line/mic inputs and 2 BGM inputs

Original price was: $2,149.00.Current price is: $1,934.10.

In Stock
 
ENQUIRE
 
DELIVERY CHARGES
SKU: VM2240 Category: Tag:

Description

The TOA VM2240 is a multi-function amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size, requires rack mounting kit). TOA VM2240 comes with 4 audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-zone selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions(*1) in the emergency situation.

Broadcast can be made from an optional TOA RM-200M Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, for 100 V application the unit features the surveillance function(*2) which automatically checks the system for failures. (*1) An optional EV200M Voice Announcement Board is required. (*2) An optional SV200MA Surveillance Board is required (both the EV200M and SV200MA are special order / indent items).

For rack mounting of the TOA VM2240 use the TOA MB36 Rack Mounting Kit.

Features

  • Programmable system management amplifier
  • 240 W
  • 5 switchable high impedance speaker zones with adjustable attenuators
  • 9 units can be combined to increase the output power and number of zones
  • 4 input channels come with volume and bass/ treble control on the front panel
  • Both BGM inputs with level pre-adjustment
  • The routing to the zones of the 3 microphone/ line level inputs and the telephone paging input can be pre-set
  • Emergency power input, remote power control, 4 built-in chimes etc.

Specifications

Power Source AC: 230 V
DC: 24 V/15 A
Applicable cable diameter: AWG22 – AWG14
Power Consumption on AC Mains With no signal present: 54 W
Under normal operating conditions according to
EN60065: 1998 sec. 4.2: 255 W
With rated output signal: 549 W
Current Consumption on 24 V DC Power Input With no signal present: 1 A
Under normal operating conditions according to
EN60065: 1998 sec. 4.2: 5 A
With rated output signal: 14 A
Rated Output 240 W
Output Voltage /Impedance 100 V/42 Ω
(selectable by the internal wiring change)
Frequency Response 50 Hz – 16 kHz
Distortion 1 % or less
Signal-to-Noise Ratio 60 dB or more
Tone Control Bass: 100 Hz ±10 dB
(Inputs 1 – 3 and BGM individually adjustable.)
Remote Microphone /Expansion Amplifier Connection 2 RJ45 female connectors for connecting the RM-200M Remote
Microphone and the VM-2120 or VM-2240 unit used as an
expansion amplifier.
Maximum distance: 800 m (874.89 yd) in total
Link cable: Category 5 Shielded
Number of connectable RM-200M’s: Up to 4
Twisted-Pair straight cable (TIA/EIA-568A standard)
Input Inputs 1 – 3: -60 dB(*3) (MIC)/-10 dB(*3) (LINE) (changeable)
600 Ω
combined XLR connector (female)/phone jack
(Only Input 1 is additionally equipped with DIN
connector(*5).)
Telephone paging input: Push-in terminal block(*6)
Voice sound: -10 dB(*3)
balanced input with shield terminal(*4)
Control: No-voltage make contact input
open voltage: 3.3 V DC
short-circuit current: under 1 mA
BGM 1 – 2: -20 dB(*3)
Power amplifier input: 0 dB(*3)
External speaker line input: 100 V line
(This input is selected when the “Unit’s
broadcast cutoff” control is activated.)
Output Speaker output: Plug-in screw connector(*7)
5-zone selector with attenuator (all zones simultaneously
selectable)
Direct speaker line output: Direct output from the power amplifier
output transformer (attenuator bypassed)
Plug-in screw connector(*7)
Line output: 0 dB(*3)
Recording output: 0 dB(*3)
Preamplifier output: 0 dB(*3)
Control Input For controlling Inputs 1 – 3
No-voltage make contact input
short-circuit current: 1 mA or less
Control Input and Output D-sub connector (25-pin
Input: No-voltage make contact input
short-circuit current: 1 mA or less
Output: Open collector output
control current: 10 mA or less
(1) External control input
Activation of messages(*8)
Activation of power
Activation and stop of Emergency Broadcast
Unit’s broadcast cutoff
(when activated by an external emergency equipment)
(2) Status output
Irregularity of communications with the Remote Microphone and
an expansion amplifier
AC power condition
DC power condition
Irregularity of the sound source of the Voice Announcement Board
Failure (FAULT) indication on
Power switch on
External Attenuator Control Output Plug-in screw connector(*7)
transfer type
contact current: 7 A (DC) or less
Surveillance Input and Output(*9) D-sub connector (25-pin
Input: No-voltage make contact input
Output: Open collector output
Power Supply 24 V DC/0.1 A
Unit RU-2001/-2002
Chime Tone Built-in chime: 2-tone chime/2-tone chime (fast repeat)/4-tone
chime (Up)/Single-tone chime/4-tone chime (Up &
Down)/Gong/off
Voice Announcement Board sound source: Pre-recorded chime(*8)
Function Two units stacking (VM-2120 or VM-2240)
Emergency broadcast (sequential control)
Broadcast priority control
Surveillance (failure detection) function(*9)
Power supply to only one Remote Microphone (RM-200M)
Line resistance: 40 Ω (one way) or less
Operating Temperature 0 ℃ to +40 ℃ (32 %%dF to 104 %%dF)
Finish Panel: ABS resin
Case: Steel plate
Dimensions 419 (W) × 143.3 (H) × 355.7 (D) mm (16.5 × 5.64″ × 14)
Weight 14.5 kg (31.97 lb)
Accessory Power cable (2 m (6.56 ft)) ……1
Miniature type time-lag fuse T3.15 A ……1
Option Rack mounting bracket: MB-36
Input transformer: IT-450
Voice announcement board: EV-200M
Surveillance board: SV-200MA

Downloads

VM2240_brochure

VM2240_data_sheet

You may also like…

  • Sale! TOA RM210 Remote Microphone Zone Extension Board for RM200M

    TOA RM210

    Remote Microphone Zone Extension Board for RM200M. (Special Order/ Indent Item)

    (0 reviews)
    Original price was: $539.00.Current price is: $485.10. ADD TO CART
  • Sale! TOA RM200M Connects to the VM-3240VA, VM-3360VA, VM-2120 and VM-2240.

    TOA RM200M

    Connects to the VM3240VA, VM3360VA, VM2120 and VM2240 mixer Amplifiers

    (0 reviews)
    Original price was: $879.00.Current price is: $791.10. ADD TO CART
  • Sale! TOA EV200M Voice announcement board with 128MB Compact Flash Card included

    TOA EV200M

    TOA EV200M Voice announcement board with 128MB Compact Flash Card included

    (0 reviews)
    Original price was: $1,389.00.Current price is: $1,250.10. ADD TO CART
  • Sale! TOA MB36 is used to mount a three-unit size component -3RU.

    TOA MB36

    TOA MB36 is used to mount a three-unit size component -3RU.

    (0 reviews)
    Original price was: $69.00.Current price is: $65.55. ADD TO CART

Related products

  • Sale! Boasch PLE 1MA030 Mixer.30W

    Bosch PLE-1MA030

    PLE-1MA030 Mixer Amplifier – 30W, 4 mic / line input channels, 100V and 8 Ohm

    (0 reviews)
    Original price was: $401.50.Current price is: $375.00. ADD TO CART
  • Sale! Australian Monitor HS250 250W mixer amplifier with 9 inputs, 12V phantom pwr, B/Tooth, MP3, 100V, 70V & 4ohm.
    • Australian Monitor HS250 250W mixer amplifier with 9 inputs, 12V phantom pwr, B/Tooth, MP3, 100V, 70V & 4ohm.

    Australian Monitor HS250 V2

    Australian Monitor HS250 V2 250W mixer amp, 9 inputs, 12V phantom pwr, B/Tooth 5.1, MP3, 100V, 70V & 4ohm.

    (0 reviews)
    Original price was: $1,805.00.Current price is: $1,624.50. ADD TO CART
  • Sale! TOA A9500D2 Powered 8x8 DSP Matrix Mixer with 2x 500W 100V line ouputs.

    TOA A9500D2

    TOA A9500D2 Powered 8×8 DSP Matrix Mixer with 2x 500W 100V line ouputs.

    (0 reviews)
    Original price was: $4,599.00.Current price is: $4,139.10. ADD TO CART