One Systems ONESP12D

One Systems ONESP12D Horn-loaded, high SPL, 12” two way weather protected system in rotomolded enclosure. 600W continuous power handling. 90Hz14kHz frequency response. 8-ohm operation. IP55 weather rated. U-bracket included. Bare wire inputs, gray finish.

$2,800.00

In Stock

Description

The One Systems ONESP12D  is a weather protected large format sound reinforcement system. The one piece rotomolded enclosure is made from of a UV resistant high density polyethylene and is ported to aid low frequency extension. The 12″ driver is horn loaded to achieve higher SPL than would otherwise be possible. There are 5 integrated rigging points, which can be used in conjunction with the included U Bracket kit for mounting to walls or ceilings. Two optional Pole Mount Kits are also available. The grille is made from CNC punched steel, and coated in a two-layer zinc rich, UV resistant powder coat finish.

The 12″ woofer uses a treated cone for resistance against water absorption and dry rot. The high energy ferrite magnetics ensure high SPL for maximum coverage. The high frequency driver is mounted in front of the woofer to a large mouthed horn. This allows the compression driver to be crossed over at a lower frequency to maintain full pattern control across the entire frequency spectrum. The large format compression driver in the One Systems ONESP12D is a new design which offers extremely high SPL, avoiding the need for a separate mid band and high frequency compression drivers, and still providing high SPL.

The  ONESP12D is well suited to outdoor environments where a reliable, weatherproof system is specified.

Features

•High-performance horn-loaded 12-inch two-way speaker that provides high intelligibility and prodigious 130 dB continuous
calculated output capability
• 600 watts continuous, 2,400 watts peak power handling
• High 103 dB (1 watt / 1 meter) sensitivity
• Includes robust U-Bracket made of structural steel with dual layer, zinc-rich powder coating
• Large-sized 60o x 40o horn and 3-inch HF driver equipped with titanium diaphragm provides superb pattern control and projection
• Stainless steel rigging points provide long-term safety and high corrosion resistance
• IP 55 direct weather rating
• Optional SP.PMK and SP.PMT pole mount kits are available for
mounting to round or square poles

Specifications

See downloads tab

Downloads

ONESP12D_datasheet

You may also like…

  • One Systems SPPMK Powder coated Pole Mount Kit for SP models (No Tilt)

    One Systems SPPMK

    One Systems SPPMK Powder coated Pole Mount Kit for SP models (No Tilt)

    (0 reviews)
    $350.00 ADD TO CART