One Systems ONESP8

One Systems ONESP8 8” coax two-way weather protected system in rotomolded enclosure. 250W continuous power handling. 105Hz-18kHz frequency response. 8-ohm or 70.7-100 v operation. IP55 weather rated. U-bracket included. Bare wire inputs, gray finish.

$1,249.00

In Stock

Description

The One System ONESP8 is a weather protected medium format sound reinforcement system. The one piece rotomolded enclosure is constructed from UV resistant polyethylene and features a 35mm pole mount socket to mount of top of a standard speaker pole. The enclosure is ported to aid low frequency extension, and the 8″ driver is horn loaded to achieve higher SPL than would otherwise be possible. There are 5 integrated rigging points, which can be used in conjunction with the included U Bracket kit for mounting to walls or ceilings. When pole mounting is required, an optional Pole Mount Kit can be purchased. The grill is made from CNC punched steel and coated in a two-layer zinc rich, UV resistant powder coat finish.

The 8″ woofer uses a treated cone paper pulp for resistance against water and dry rot. The high energy ferrite magnetics ensure high SPL for maximum coverage from a small system. The high frequency driver is mounted in front of the woofer to a large mouthed horn. This allows the compression driver to be crossed over at a lower frequency to maintain full pattern control across the entire frequency spectrum.

The One System ONESP8 is well suited to outdoor environments where a reliable, weatherproof system is specified. The line matching transformer allows connection to a high voltage line to minimize cable losses over long cable runs, further improving the usability of the system.

U-Bracket is included

Features

• High-performance 8-inch twoway horn-loaded speaker with high speech intelligibility and surprising output capability from a compact enclosure
• Can be powered Lo-Z (8 ohms) or Hi-Z (70.7 or 100 volts) with selectable taps at 150, 75 or 37.5 watts
• 200 watts continuous, 800 watts peak power handling
• 90o x 40o horn with mediumformat HF driver provides superb pattern control and high intelligibility
• Includes robust U-Bracket made of structural steel with dual-layer, zinc-rich powder coating
• Stainless steel rigging points provide added safety and high corrosion resistance
• IP 55 direct weather rating
• Optional SP.PMK and SP.PMT pole mount kits are available for mounting to round or square poles

Specifications

See downloads tab

Downloads

ONESP8_datasheet

Related Products

    • One Systems SPPMK Powder coated Pole Mount Kit for SP models (No Tilt)

      One Systems SPPMK

      One Systems SPPMK Powder coated Pole Mount Kit for SP models (No Tilt)

      (0 reviews)
      $199.00 ADD TO CART