Australian Monitor DM4X4

Australian Monitor DM4X4 4 in 4 out Dante expansion card

Original price was: $325.00.Current price is: $292.50.

In Stock
SKU: DM4X4 Category: Tag:


Australian Monitor DM4X4 Dante expansion card for use with the IS series of power amplifiers.

Provides 4 inputs channels from a Dante network which can be routed to any amplifier output channel. In addition, 4 Dante outputs channels are available to route any analogue inputs back on to the network.

Note: Due to restrictions in the Dante solution, the Australian Monitor DM4x4 only supports 2 transmit and 2 receive flows (A flow can contain up to 4 audio channels). This means that the Dante audio connected must be in one of the following modes.

  • 1 device containing 4 audio streams
  • 2 devices containing 2 audio streams
  • It does not support 4 devices containing 1 audio stream (This would need 4 flows).
  • This restriction applies to both receive and transmit directions.


• 4 Input Channels
• 4 Output Channels
• AES67 Support
• Simple expansion slot install using a ribbon cable
• Dante® network setup is performed using the Dante® Controller software from Audinate.
• Compatible with IS2120P, IS2250P, IS4120P, IS4250P


Output Power per Channel N/A Frequency Response N/A
Output Channels N/A THD+N N/A
Output Mode N/A Signal to Noise Ratio N/A
Input Voltage N/A Input Sensitivity N/A
Mounting N/A Cooling N/A
Warranty 5 years
Product Dimensions
(W x D x H)
Shipping Dimensions
(W x D x H)
Net Weight Shipping Weight
GTIN EAN 9323383020016