Ampetronic FSM+SCC
Product Enquiry Form
Delivery Charges
Freight Charges within AustraliaÂ
Soundgear Australia will do their very best, to ensure your order arrives as quickly as possible. We use an integrated network of post and road companies like StarTrack, TNT, Go Logistics, and Australia Post to deliver Australia wide. We will do our best to ship as quick as possible.Â
Oversize Items:
- Oversize items or multiple items such as horns, speakers, sports packs, may also incur additional charges to those calculated at checkout. We will contact you with any additional charges.
GENERAL AUDIOÂ (excludes Lecterns-see Lectern pricing below)
| Price Range | Cost | Method          |
| Up to 25 | $15 | Express Post              |
| $26 to $300 | $25 | Post / Road       |
| $301 to $500 | $28 | Post / Road       |
| $501 to $1000 | $30 | Post / Road       |
| $1001 to $2500 | $45 |
Post / Road       |
Â
Oversize Items:
- Oversize items or multiple items such as horns, speakers, sports packs, may also incur additional charges to those calculated at checkout. We will contact you with any additional charges.
Freight charges to W.A /N.T/Far North QLD, Regional and Rural areas:
- Additional charges to those listed may apply.
- Please contact us for a quote.
- If you place an order and we can’t get it to you for the freight charged we will contact you and let you know of the additional charges.
Sending to Residential Addresses:
- For all residential deliveries an additional $27.50 Inc-GST may also be charged for certain brands (Mipro, Bosch, Earthworks, Alfatron, FBT, Antari).
- If we cannot express Post it and it needs to go with a courier service, the additional residential fee will apply.Â
- If you have placed an order online we will contact you if this additional charge applies. Please feel free to call us on 02 9585 8687 to check the freight charge.
Deliveries to residential address need an “ATL” (authority to leave goods)Â
- Please leave us a note at check out advising us of an “ATL” ie/porch, front door etc should you not be home to sign.
Â
| Price Range | Cost | Method                 Delivery times |
| Zone A | $110 | Zone A Areas (Sydney, Melbourne, Canberra, Adelaide, Newcastle, Wollongong) |
| Zone B | $242 | Country /Regional-All states, Perth, QLD -(excluding TAS /N.T) |
| Zone C | Â | Quote required for TAS /N.T |
| Note: | Â | Zone A only calculated at checkout. All other zones will need to be charged separately. We will contact you to arrange this. |
**WE DO NOT SHIP OVERSEAS**
The meter is supplied in a soft case with an audio CD with the required test signals, and full operating instructions including a guide to commissioning. The Ampetronic FSM can be used to monitor, set up or commission any induction loop system regardless of the manufacturer or type.
Applications include:
- Accurate set-up and commissioning
- System monitoring and maintenance
- Site surveys
- Certification to IEC60118-4:2006
- Assessment of frequency losses due to metal
- Assessment of loop coverage and overspill
- Assessment of background noise
Signal Connection Cables:
The cables allow connection from an audio source on a 3.5mm stereo jack socket such as a headphone output commonly found on most portable audio devices and laptops. They are intended to interface to a wide range of typical inputs and provide appropriate attenuation where applicable.
- Simple assessment of any system to
IEC60118-4 - Three modes of operation for three test types
- A-Weighted background noise • Broad band mode (50Hz – 8kHz)
- Frequency response (100Hz, 1kHz, 5kHz)
- True RMS detection calibrated to
400mA/m = 0dB - Wide viewing angle LED display
- Colour coded LEDs for simple readout
- Resolution to 1dB
- Head phone output with volume control
- Ergonomic, rugged, light weight construction
- Soft carry case
- 5 year warranty
Background Noise
To determine the level of the background magnetic field present in the intended location for the loop system. Also used to measure low level signals to assess overspill outside a loop system.
- A-Weighted filter
- True RMS detection referenced to 400mA/m
- Scale -42 to -12dB
- Audio (headphone) output is post filter for monitoring
Field Strength
A broad band measurement to measure field strength delivered by the system.
- Broad band measurement 50Hz to 8kHz
- True RMS detection referenced to 400 mA/m
- Scale -22 to +8dB with 1dB intervals from -3 to +6dB
- Suitable for use with sine wave, pink noise, or combination signals (provided), or any other real signals
Frequency Response
Third octave filters for measuring performance across the required frequency spectrum as required by IEC60118-4. Used to confirm adequate power at high frequencies as required for good intelligibility. Used to assess frequency dependent loss due to metal structures, and to optimise frequency compensation.
- Third octave bands at 100Hz, 1kHz and 5kHz
- True RMS detection
- Scale resolution to 1dB
- For use with pink noise only (signal provided)
- Audio (headphone) output is post filter
Specifications
Magnetic field measurement
| Coil orientation | Vertical when unit held upright |
| Reference level | 400mA/m (In Field strength mode) |
| Frequency response | 50Hz to 8kHz ±0.25dB |
| 30Hz to 10kHz -3dB | |
| Gain stability | Better than 0.5dB over all conditions |
Outputs
| Display | Flying spot LED bar graph with wide viewing angle |
| Colour coded (green for -3dB to +3dB) | |
| Audio (headphone) | 16Ω min (32Ω per side) |
| 3.5mm stereo jack connector |
Power
| Battery | 2 x AA alkaline (supplied) |
| Battery monitor | Battery OK when LED illuminated |
| Battery life | Up to 100hrs use, dependent on use pattern |
Physical
| Dimension | 84 x 27 x 140mm (meter only) |
| Weight | 150g excluding batteries |
| Operating environment | -10 to +45°C |
| 10 to 85% RH |