Description
The Antari AirGuard FLD05 (6 pack) Disinfection Fluid is only for use in the AG20, AG800 AG1500 or AG3000 Disinfection Fog Machines (sold separately). The FLD05 disinfectant fluid is converted into a fog or vapour by the AG series Disinfection Fog Machines to fill an entire space in any direction laying a thin layer on the surface of objects to inhibit bacteria growth and kill most fungi, germs, virus, dust mites. It can also get rid of bad odours effectively. The AirGuard FLD05 can be used as a regular disinfectant maintenance solution in any place, such as school class rooms and halls, offices, theatres, hospitals, department stores, gymnasiums and airports just to name a few).
Periodically sanitizing an area or room with the Antari Airguard FLD05 Disinfection Fluid and AG Sereis Fog Machine to kill germs and viruses and provides an additional layer of protection to complete a holistic approach to hygiene and sanitisation.
What is the active ingredient in FLD for sterilisation?
Umbelliferol, which is an effective antibacterial agent approved by the Taiwan Ministry of Health and Welfare. It has good sterilisation ability and can kill a variety of bacteria, yeast, fungi and viruses. It can also inhibit oxidation.
Is the disinfection ingredient harmful to humans?
Umbelliferol is safe, the ratio of disinfection ingredients used is within the guidelines set by the Taiwan Ministry of Health and Welfare.
How does the FLD05 Disinfectant work?
The FLD05 disinfectant works by denaturing the virus’ proteins, which makes it incapable of binding to human cells.
It is effective against the influenza virus and general pneumonia.
It has not been tested against the COVID-19 virus, as it is regulated by the government and no samples are available for testing purposes.
What is the fragrance of FLD05?
FLD05 has a menthol and fruity fragrance.
How long can FLD05 be stored?
FLD05 has a shelf life of 5 years and should be stored in a cool area out of direct sunlight. Once opened, it should be used within 6 months.
How much smoke is required and how long does it take?
The AirGuard AG800 can produce one cubic metre of smoke in 3 seconds. To work out how long you need to operate AirGuard for, first find out the volume of the room, then multiply by 3 to get the time required in seconds. For example, if the room is 12 square metres with a 2.6m ceiling (for a volume of 31.2 cubic meters), it will take the AirGuard AG800 approximately 93 seconds to fill the room.
The AG1500 has two output modes, normal and high. In High output mode, AG1500 can produce one cubic metre of smoke in 0.75 seconds. To work out how long you need to operate AirGuard for, first find out the volume of the room, then multiply by 0.75 to get the time required in seconds. For example, if the room is 25 square metres with a 4m ceiling (for a volume of 100 cubic meters), it will take the AG1500 approximately 75 seconds to fill the room.
When disinfecting a car, turn the air conditioner to recycle and use for 30 seconds at a time.
After the AG800 has sprayed the FLD05 disinfectant fog, allow 5 to 10 minutes for the fog to circulate and cover the space in order to disinfect.
How long does the effect last?
This depends on the environmental conditions, such as ventilation and number of human movements.
For example, disinfection in a car for personal use can be effective for 2 weeks, however a car used frequently for business should be disinfected each day.
In general the more occupied a location is, the more frequently it should be disinfected.
