Description
The Antari AirGuard AG3000 is a mobile, convenient, and highly functional Disinfection Fog Machine. The AG3000 converts the FLD05 disinfectant fluid (sold separately) into a fog or vapour to fill an entire space in any direction with incredible ease. Once the disinfectant fog settles (around 5 – 10 minutes) it leaves a thin layer on the surface of objects in the room to inhibit bacteria growth and kill most fungi, germs, virus, dust mites and it can also get rid of bad odours.
The AirGuard AG3000 can be used as a regular disinfectant maintenance solution suitable for larger areas, such as school halls, large offices, theatres, department stores, plazas, airports, gymnasiums, museums, libraries, houses of worship, and conference centers just to name a few. The unit is not only ideal for larger venues but a perfect solution for situations that require quick clean-ups between services and classes.
The high flow rate of 130ml per minute combined with the built-in variable speed fan featuring 9 different angle settings ensure that the anti-bacterial fog is swiftly disbursed by the AG3000 over the larger areas. The fan speed can be set via the onboard Digital Control Interface from 20% to 100% or even turned off.
There onboard Digital Control Interface also allows for the fog Duration and Interval times to be set between 1 second to 300 seconds. The Interval time can also be turned off so that it will only fog for the set Duration time and then turn off. Continuous Output operation can also be selected. The Volume and Timer Outputs can be set anywhere between 1% and 100% depending on the Output Mode selected (High or Low).
The Antari AirGuard AG3000 also features built-in DMX-512 protocol for remote automation, and is built inside a rugged rolling road case providing a high degree of protection and rapid transport in and out of spaces.
The AG3000 has two output modes, normal and high. In High output mode, AG3000 can produce one cubic metre of smoke in 0.23 seconds. To work out how long you need to operate AirGuard for, first find out the volume of the room, then multiply by 0.23 to get the time required in seconds. For example, if the room is 65 square metres with a 4m ceiling (for a volume of 260 cubic meters), it will take the AG3000 approximately 60 seconds to fill the room.
After the AG3000 has sprayed the FLD05 disinfectant fog, allow 5 to 10 minutes for the fog to circulate and cover the space in order to disinfect.
Periodically sanitizing an area with the Antari AirGuard AG3000 Disinfection Fog Machine and FLD05 Disinfection Fluid to kill germs and viruses provides an additional layer of protection to complete a holistic approach to hygiene and sanitisation.
What is the active ingredient in FLD for sterilisation?
Umbelliferol, which is an effective antibacterial agent approved by the Taiwan Ministry of Health and Welfare. It has good sterilisation ability and can kill a variety of bacteria, yeast, fungi and viruses. It can also inhibit oxidation.
Is the disinfection ingredient harmful to humans?
Umbelliferol is safe, the ratio of disinfection ingredients used is within the guidelines set by the Taiwan Ministry of Health and Welfare.
How does the FLD05 Disinfectant work?
The FLD05 disinfectant works by denaturing the virus’ proteins, which makes it incapable of binding to human cells. It is effective against the influenza virus and general pneumonia.
It has not been tested against the COVID-19 virus, as it is regulated by the government and no samples are available to test.
What is the fragrance of FLD05?
FLD05 has a menthol and fruity fragrance.
How long can FLD05 be stored?
FLD05 has a shelf life of 5 years and should be stored in a cool area out of direct sunlight. Once opened, it should be used within 6 months.
How much smoke is required and how long does it take?
The AG3000 has two output modes, normal and high. In High output mode, AG3000 can produce one cubic metre of smoke in 0.23 seconds. To work out how long you need to operate AirGuard for, first find out the volume of the room, then multiply by 0.23 to get the time required in seconds. For example, if the room is 65 square metres with a 4m ceiling (for a volume of 260 cubic meters), it will take the AG3000 approximately 60 seconds to fill the room.
After the AG3000 has sprayed the FLD05 disinfectant fog, allow 5 to 10 minutes for the fog to circulate and cover the space in order to disinfect.
How long does the effect last?
This depends on the environmental conditions, such as ventilation and number of human movements. For example, disinfection in a car for personal use can be effective for 2 weeks, however a car used frequently for business should be disinfected each day. In general the more occupied a location or area is, the more frequently it should be disinfected.
Note: The Antari AirGuard AG3000 Disinfection Fog Machine itself has no sterilisation function. The FLD05 liquid provides the sterilisation function. The sterilisation provided by smoke machines is completely different from ozone machines or air cleaners.
Note: The AG3000 may not be in stock at the time of purchase and lead times of around 4-8 weeks may apply.
| AirGuard Disinfection Fog Machine Comparison | ||
| AG20 | AG800 | |
| Rated Power | 600 Watt | 800 Watt |
| Tank Capacity | 400ml, includes level gauge | 800ml, includes level gauge |
| Warm Up Time | 1 second | 90 seconds |
| Output | Continuous, Timer | Continuous or 5 minutes |
| Output Volume (per cubic metre) |
2.14 seconds | 3 seconds |
| Fluid Consumption Rate (per minute) |
14ml | 10ml |
| Wireless Control | Yes, with W1 remote (included) | Yes, with W1 remote (included) |
| Direction of Spray | Forwards | Forwards |
| Input Voltage | 12V DC (Battery), 220-240V AC, 50/60 Hz (Charging) |
220-240V AC, 50/60 Hz, 3.5A |
| Dimensions (HxWxL) | 238 x 108 x 293 mm | 218 x 128 x 315 mm |
| Weight (no fluid) | 8.5Kg (includes battery) | 3.8kg |
| AG1500 | AG3000 | |
| Rated Power | 1450 Watts | 1600 Watt |
| Tank Capacity | 2.4L | 5L |
| Warm Up Time | 6 minutes | 8 minutes |
| Output | Continuous, Timer | Continuous, Timer, DMX |
| Output Volume (per cubic metre) |
0.75 Seconds (High Output) | 0.23 seconds (High Output) |
| Fluid Consumption Rate (per minute) |
High Output: 40ml Normal Output: 30ml |
High Output: 130ml (variable) Normal Output: 25ml (variable) |
| Wireless Control | Yes, with W1 remote (included) | No |
| Direction of Spray | Upwards | Forwards, variable speed fan assisted (9 angle adjustments) |
| Input Voltage | 220-240V AC, 50/60 Hz, 6A | 240V220-240V AC, 50/60 Hz 7A |
| Dimensions (HxWxL) | 381 x 193 x 344 mm | 719 x 428 x 728 mm |
| Weight (no fluid) | 10.7kg | 52.5kg |
