TOA EM600 Flush mount boundary microphone, electret condenser, omnidirectional pattern

$449.00 $404.10

In Stock
SKU: EM600 Category: Tag:


TOA EM600 Flush mount boundary microphone, electret condenser, omnidirectional pattern

The TOA EM600 is an condenser microphone of only 28 mm (1.1″) in diameter designed for sound pick-up application.

It can be flush-mounted into a ceiling, wall, or desk, making it unobtrusive.

The EM600 Flush-Mount Microphone from Toa Electronics is an omni directional electret condenser microphone designed to be mounted in ceilings, walls, tables, and other surfaces for conferencing and security monitoring systems. The microphone can be powered by between 9 and 52 volts of phantom power. The microphone body is threaded and comes with a tightening nut for the installation as well as two rubber isolation rings intended to reduce the transfer of structural vibration

It provides clear and high-quality sound and as such ideal for conference room recording and security monitoring.


• Electret condenser microphone element with
omnidirectional pattern for comprehensive pickup.
• Unobtrusive design allows easy flush-mounting in walls, ceilings, and desktops.
• Optimized to deliver best performance when used on a desk or attached to a ceiling.
• A 50 Hz low-cut filter reduces intrusive noise, such as air conditioner rumble or door opening/closing.
• Two rubber isolation rings are provided as an accessory serving to reduce vibration.
• Wide frequency range of 30 – 20 kHz provides wellbalanced sound with clarity and a satisfying tonal
• Phantom power range of 9 to 52 volts enhances
operational versatility


Element Electret condenser
Polar Pattern Omnidirectional
Rated Impedance 120 Ω, balanced
Rated Sensitivity -36 dB (1 kHz 0 dB=1 V/Pa)
Phantom Power 9 – 52 V DC
Frequency Response 30 Hz – 20 kHz
Output Connector XLR-3-12 equivalent
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Finish Body: Steel, white, semi-gloss, paint
Head: Zinc-plated steel wire, white, semi-gloss, paint
Dimensions φ28 × 68 mm (φ1.1″ × 2.68″)
Weight 85 g (0.19 lb)
Accessory Rubber Isolation Ring …2, M20 Nut …1