Shure SM31FH

Shure SM31FH fitness headset microphone for fitness training. Suit Shure, JTS Beltpacks.


In Stock
SKU: SHR-SM35-TQG Categories: , Tag:


Shure SM31FH Cardioid fitness headset condenser microphone offers a moisture-repelling hydrophobic construction for use in fitness training.

The moisture-repellent cartridge housing secures the product a long life by protecting the microphone from the corrosion damage that usually causes fitness instructor’s headsets to fail.

Flexible gooseneck provides discrete adjustment capabilities to optimize placement for greatest isolation.

Built with the legendary Shure precision and engineering for durability and performance.

The Shure SM31FH features include windscreen and compatibility with Shure bodypack systems for replacement of TA4F-connected microphones.

Replacement windscreen packs are Shure RK 379 (2 piece pack) and Shure RK379.50PK (50 piece pack).


  • Wearable wire frame headset with secure, comfortable fit made for fitness and aerobics instructors
  • Integrated moisture-repelling hydrophobic fabric protects the microphone element from harmful corrosion for use in humid environments
  • Flexible gooseneck provides discrete adjustment options to optimize placement for greatest isolation
  • Lightweight and low-profile form factors stave off fatigue during high-impact use
  • Compatible with Shure wireless bodypack systems for direct replacement of TA4F-connected microphones
  • Available with a wide range of Shure wireless systems, renowned for ease of use and reliable performance
  • Included windscreen tames plosive, breath and wind noises for clean and intelligible sound
  • Tailored frequency response refined for crisp and clear vocal reproduction
  • Legendary Shure precision engineering for durability and performance


  • Type  Electret Condenser
  • Frequency Response 45 Hz to 20,000 Hz
  • Polar Pattern Unidirectional (Cardioid)
  • Output Impedance @ 1 kHz 600 Ω
  • Audio Output Level -50.0 dBV/Pa
  • Signal-To-Noise Ratio [1] @ 1 kHz 66 dB
  • Maximum SPL [1] 1000 Ω load, 1  kHz@ 3%THD 145.0 dB
  • Dynamic Range [1] @ 1 kHz, 1000 Ω load 117.0 dB
  • Equivalent Output Noise [1] typical, A-Weighted  28 dB
  • Power Requirements +5 V DC (nominal), 10 V maximum (DC bias)
  • Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
  • Cable 1.1 m (45 in.)
  • Connector TA4F



Wearing the Microphone

  1. Install the windscreen on the microphone boom.
  2. Place the headband around the back of the head, with the boom on the left side.
  3. Place the microphone at the corner of the mouth. To decrease pops and plosives, avoid placing the microphone directly in front of the mouth

Maintenance and Cleaning

  • If the microphone is exposed to perspiration, remove the windscreen and gently wipe the microphone underneath with a damp, non-abrasive cloth. Allow the microphone to air dry before replacing the windscreen and storing.
  • The windscreen can be washed with a mild antiseptic, and should be fully rinsed and dried before reinstalling on the microphone. Do not use alcohol-based disinfectants.


Related Products

  • Shure RK379-50PK Foam Windscreen Replacement Kit

    Shure RK379

    Shure RK379 Foam Windscreen Replacement Kit 2 piece with one clip to suit SM31FH Head Microphone

    (0 reviews)
    $13.50 ADD TO CART
  • Shure RK379-50PK Foam Windscreen Replacement Kit

    Shure RK379-50PK

    Shure RK379 Foam Windscreen Replacement 50 piece Kit to suit SM31FH Head microphone.

    (0 reviews)
    $649.00 ADD TO CART