Sennheiser XSW-D XLR Base Set

Sennheiser XSW-D Wireless Digital XLR Base Set with XLR Female TX, XLR Male RX, USB Charging Cable.

$460.00

In Stock
 
 
 
SKU: XSW-D XLR Base Set Categories: , Tag:

Description

Sennheiser XSW-D XLR BASE SET is an easy entry point into the world of wireless microphone audio for singers, vocalists, and presenters looking for a stage-ready system that’s both cost effective and simple to use. It puts world-renowned Sennheiser wireless sound quality in a miniaturized, plug-and-go, 1-button digital system that anyone can operate. Plug it in, power it up, and you’re immediately up and running, streamlining your setup so you can concentrate on delivering your performance with confidence.

The XSW-D XLR BASE SET comes with a plug-on transmitter ready to be used with a handheld dynamic microphone of your choice. The XLR-equipped, plug-in receiver connects to a wide variety of professional audio gear, including mixing boards and portable PA systems, allowing you to capture crisp-sounding vocals on stage, or in rehearsals, houses of worship, and event spaces.

Unlike traditional analog wireless systems, the XSW-D digital system operates in the 2.4 GHz ISM band, away from interruptions and dropouts caused by TV and radio channel interference.

Thanks to Sennheiser’s channel allocation and interference management technology, the system selects the best operating frequency and automatically switches to a clean channel, providing reliable transmission at a distance up to 250′ line of sight.

For optimal performance, users are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.

Package Includes: The price listed here is for the Sennheiser XSW-D XLR Base Set comprising of
1 x XSW-D XLR Female TX
1 x XSW-D XLR Male RX
1 x USB Charging Cable

 

 

Features

  • One touch ease-of-use
  • 2.4 GHz digital transmission for worldwide operation
  • 75m range (250ft) in optimal conditions
  • Up to 5 hours battery life on a single charge
  • Switch between multiple transmitters linked to one receiver
  • Configure any combination of transmitters and receivers
  • Mute from either transmitter or receiver

Specifications

System
Frequency Range 2.400 to 2.483 GHz
Latency <4 ms with aptX Live Codec
Transmission Range 250′ / 76.2 m (Line of Sight)
Simultaneous Operation of Units Up to 5 Systems Simultaneously
Frequency Response 80 Hz to 18 kHz
Signal-to-Noise Ratio ≥106 dB
THD <0.1 %
Modulation GFSK with TDMA
Operating Temperature -10 to 55° C / 14 to 131° F
Relative Humidity 95% (Non-Condensing)
Transmitter
Type Plug-On Transmitter
Input Connector XLR-Female
Phantom Power No
RF Output Power 10 mW
Input Level Mic-Level Input Only
Battery Type: Built-In, USB-Rechargeable, Lithium-Ion
Battery Life: 5 Hours
Charging Time: 3 Hours (Typical)
Charging Cycles: Up to 1000 Cycles
Nominal Voltage: 3.7 V
Cell Capacity: 850 mAh
Input Voltage: 5.0 V (Typical)
Charging Temperature: 32 to 140° F / 0 to 60° C
Dimensions 4.0 x 0.9 x 1.1″ / 102 x 24 x 28 mm
Weight Not Specified by Manufacturer
Receiver
Type Plug-In
Output Connector XLR-Male
Audio Output Level Consumer Line-Level Only: -12 dBu (Maximum)
Battery Type: Built-In, USB-Rechargeable, Lithium-Ion
Battery Life: 5 Hours
Charging Time: 3 Hours (Typical)
Charging Cycles: Up to 1000 Cycles
Nominal Voltage: 3.7 V
Cell Capacity: 850 mAh
Input Voltage: 5.0 V (Typical)
Charging Temperature: 32 to 140° F / 0 to 60° C
Dimensions 4.3 x 0.9 x 1.1″ / 109 x 24 x 28 mm

Downloads

XS_Wireless_Digital_XLR_Base_Set_Product_Specification

Videos