MiPro AT100a

Mipro AT-100a circularly polarized antenna can effectively reduce the polarization loss of the antenna to improve signal strength.

$1,190.00

In Stock
SKU: AT100a Category: Tag:

Description

MiPro AT100a Circularly Polarized Antenna. The AT-100a circularly polarized antenna can effectively reduce the polarization loss of the antenna to improve signal strength. TNC input connectors to connect with a receiver or a transmitter. RX connector has a 0-12dB adjustable booster. Waterproof and weather resistant for outdoor installations. Can either be mounted on a mic stand or wall-mounted with MS-90 bracket. Priced per unit.

Features

Patented in Multiple Countries. Distinctive Appearance
Providing an optimized solution for both transmitting and receiving RF signals throughout the UHF bandwidth, the AT-100a has a distinctive appearance and is patented in multiple countries.

Main Features
The front area is the main focus of antenna direction for either vertical or horizontal polarization. The AT-100a circularly polarized antenna can effectively reduce the polarization loss of the antenna to improve signal strength. It is the optimum solution for the 470 ~ 1,000 MHz bandwidth with 6 ~ 8 dBi antenna gain and is certified to meet the latest CE/FCC new telecom regulations.

Results
The AT-100a is an ideal antenna system for utmost signal stability. Antenna features affect transmission range, stability and anti-interference performance. Therefore, the antenna is a vital component in any system installation, especially in complicated and demanding RF environments for wireless microphones and wireless monitoring systems. It greatly improves signal stability and reduces interference and signal drop-outs caused by polarization problems.

Built-in Connectors
The AT-100a has two built-in signal connectors: “TX/RX” connector can be connected to a transmitter or receiver, however, connection to a short coaxial cable is recommended when connected to a receiver. “RX” connector (cannot be connected to a transmitter) has a built-in 0 ~ 12 ± 1 dB gain adjustable booster and thus provides extended reception range and compensates the signal loss of coaxial cable to improve reception range and signal quality. The power of gain controllable booster can be provided by a MIPRO AD-708 antenna divider or any MIPRO ACT Series receivers which provides bias by adding an adjustor on their antenna connectors.

Waterproof
Waterproof and weather resistant, the AT-100a is ideal for both outdoor and indoor applications.

Specification

Type Additional antenna
Frequency Range UHF 470 ~ 1,000 MHz
Antenna Gain 6 ~ 8 dBi
Polarization Circular polarization
3-dB Beam Width 72°
Built-in Booster Built-in 0 ~ 12 dB gain controllable booster
VSWR < 2:1
Power Consumption RX Connector: 1.3 W / 8 V DC; TX Connector: 0 mW
Impedance 50 Ω
Connector 2 × TNC female
Power Supply 8 ~ 15 V DC bias is required for RX connector
Dimensions (W × H × D) 350 × 350 × 225 mm / 13.8 × 13.8 × 8.8 “
Net Weight Approx. 1.5 kg / 3.3 lbs
Note Refer to actual product in the event of product description discrepancy.

Downloads

 MiPro-AT100a-spec

MiPro-AT100a-guide